iOS Guide

Using Pxlinstaller

For support in English, ask for help on the r/Jailbreak Discord Server.

Required Reading

TIP

This page is optional, but is highly recommended given the unique environment that iPhone OS 1.x jailbreak use, compared to jailbreaks designed for newer firmwares.

PXLInstaller is a .pxl tweak installation utility. This allows you to install .pxl tweaks to a device running iPhone OS 1.0 to 1.1.5.

Tweaks are small modifications to change the look and/or feel of your device.

This guide will show you how you can install and uninstall tweaks.

In order to use PXLInstaller, you will need a computer.

Downloads

  • The latest version of PXLInstallerOpen in new window for your platform.
    • For Apple Silicon Macs, this will be PXLInstaller_macOS_arm64.zip
    • For Intel-based Macs, this will be PXLInstaller_macOS_x64.zip
    • For Linux, this will be PXLInstaller_Linux_x64.zip
    • For Windows, this will be PXLInstaller_Windows_x64.zip

Installing PXLInstaller

TIP

Extract the zip file for your platform before proceeding with this guide.

Please select your operating system:

  1. Plug your device into your computer
  2. Double-click pxlinstaller-gui

PXLInstaller is now setup, and can now be used to install .pxl tweaks. Note that you will need to repeat the last step in order to run PXLInstaller at any point in the future.

  1. Plug your device into your computer
  2. Open a terminal application
  3. Run cd <path/to/pxlinstaller>
    • In most cases, this will likely mean running cd ~/Downloads/PXLInstaller_Linux_x64
  4. In the same terminal window, run sudo pxlinstaller-gui

PXLInstaller is now setup, and can now be used to install .pxl tweaks. Note that you will need to repeat the last step in order to run PXLInstaller at any point in the future.

Fixing Device Detection

TIP

This section is only required if you are using something besides Antares, or are using a different computer than the one that you used to initially run Antares.

If you used Antares on the same computer you're following this guide on, this section can be skipped.

  1. Plug your device into your computer
  2. Open zadig.exe
  3. Toggle on List All Devices by going to Options -> List All Devices
  4. Select your iPhone or iPod Touch
    • This will likely be whatever has (Interface 1) listed next to it
  5. Set the target driver to libusbK, then click Replace Driver
    • Note that libusbK may be listed as something like libusbK (v3.1.0.0)
    • If prompted, reboot your computer

Running PXLInstaller

  1. Plug your device into your computer
  2. Open pxlinstaller-gui.exe

Installing Tweaks

TIP

.pxl tweaks will need to be found externally. There is no modern repository system compared to what exists in jailbreaks on newer firmware versions.

  1. Open the PXLInstaller application
  2. Click Install Application
  3. Locate and select the .pxl file that you have downloaded, then click Open

The tweak should now be installed to your device, and your device will automatically respring.

Uninstalling Tweaks

  1. Open the PXLInstaller application
  2. Locate the tweak that you would like to uninstall on the right-hand side of PXLInstaller, then click X, then click Yes

The tweak should now be removed your device, and your device will automatically respring.